Motorized Skylight Shades

Motorized Skylight Shades offer the most amount of flexibility, especially for shades which are located higher than manual telescopic operating poles can reach. With the use of multiple unit remote controls and switches, a number of shades can be opened or closed at the same time. In addition, the programmable timer gives more flexibility and control options than ever offered before. Motororized skylight shades need to be custom ordered. Please request a quote, or contact us for more information.

Motorized Skylight Shades are available with two power sources:

  • Battery Operated with a wand with 8 lithium batteries. These batteries generally last up to 2 years. The batteries are usually located behind the shade headrail. It is best to try to keep the batteries out of the sun. Also available are 48” or 96” cord extensions to aid in positioning the battery wand closer to the user.
  • Hard Wired with 120 Volt AC/DC power centers (transformers). The wires plug into the wires coming out of the shade headrail and are led to a convenient source of 120 volt AC current. An attic or closet location is the usual location to make this connection. The power center plugs into the 120 volt outlet or can be hard wired in a switch box.

The shades can be operated with various controls:

  • Single Unit Radio Frequency Remote Control
  • Four Channel Radio Frequency Remote Control
  • Single Unit wall mounted wireless switch
  • Four Unit wall mounted wireless switch
  • Single Channel Programable Timer

Remote controls and wall switches operate in the same manner. The wall switches are wireless and are powered by a battery. All controls operate up to 150 feet away from the shade even through walls, although not steel.

Motorized Skylight Shade Controls
Motorized skylight shades can be operated with various controls:

Single Unit Radio Frequency Remote Control

Single Unit radio frequency controls can operate any number of shades at the same time.

 

Four Channel Radio Frequency Remote Control

Four Unit radio frequency controls can operate any number of shades on the same frequency at the same time. With four different frequencies, different banks of shades can be operated at different times – all on the same frequency at the same time.

 

Single Unit Wall Mounted Wireless Switch

Single Unit radio frequency controls can operate any number of shades at the same time.

 

Four Unit Wall Mounted Wireless Switch

Four Unit radio frequency controls can operate any number of shades on the same frequency at the same time. With four different frequencies, different banks of shades can be operated at different times – all on the same frequency at the same time.

 

Single Channel Programmable Timer

Single Unit radio frequency controls can operate any number of shades at the same time.

 

Please note that each remote control or wall switch is programed in conjunction with the shade motor at the factory. To replace a lost remote control the shade must be sent back to be programed with the replacement remote control.

MAXIMUM SIZES:
Motorized Skylight shades are made with a round take-up rod in the headrail As the rod turns it accumulates the cording, much like a fishing reel. Therefore the width of the shade with take-up rod will determine how much cording can be accumulated and therefore the height of the shade. Please see the chart below to see the ranges of sizes that can be manufactured.

WIDTHS
MAXIMUM LENGTHS
22”
30'
24'
45'
30”
54'
36”
72'
42”
72'
48'
72”

Maximum motorized shade width is 48”

If your window width is too great for the maximum length of the shade, consider putting two shades into the window opening as shown in the skylight section.

There are no available products under this category.